< BACK TO MISCELLANEOUS Gläser Fairings Gläser factory docs 1/1 Gläser - Nürburg 1/1 Internet found pics 1/1 Gläser - Type TSL/5 1/1 Gläser - Type TS 1/1 Gläser - Sport Type II 1/1 Gläser - Nürburg 1/1 From a 2013 on-line advert: "The odometer reads 67210 km/approx. 41762 mile and like should both the frame- and enginenumbers are matching, it has been manufactured in August 1974, but was first road-registered in January 1975. On the bike are still all the German police-spec components fitted, like the very special "Gläser" (http://www.flyingtpot.com/glaser%20fairings.htm ) police fairing, "Bosch" radio-unit, blue-colored alternating "Bosch" flash-lights, dual tone alternating "Hella" police-horns and a pair of original leather BMW police side cases. Furthermore, in order to protect the public, it also has the original police half-closed model BMW front fender fitted and special heat-shields on the header-pipes. Basically this bike is a standard R60/6, so normal frame, forks, engine, gearbox etc., but received, apart from all the police-equipment, several refinements like Koni heavy-duty rear shocks, forged cooling on the front-brake (by an air-scoop, never seen this before!), calibrated speedo and a different (slightly shorter) ratio on the rear-drive. In one of the side-cases I've found an original police-officers belt cpl. with gun-holster, which item I've of course have put back where it was.. Because of legal reasons the connector of the main radio-unit is taken off and the connecting-cable between the radio-unit and remote-control on the fuel-tank has been removed, where for this same reason the optical and acoustical police-signals have been disabled (by a removed twist-in type fuse* which is positioned in the lh inner fairing panel). Both the alternating (Very loud!) horns and -blue flash-lights work fine when the fuse* is back in again (*comes with the bike). The original BMW radio-box on the rear is fitted with only four bolts and can be taken off (and back on) in just little time (see photo). It is in the green/white color pattern for reason that the German government ordered all German police-vehicles to be in this very recognizable color-pattern from the first of January 1975 on. -On this listing I'm offering a special custom-made (fully sealed) m'cycle crate, careful packing and shipping from here in Belgium to a State warehouse of the shipping-company close to you at my expense. Also, when you provide me your zip-code, I can ask for a price to have it delivered to your door (which extra charge, depending on distance can be nil to be very modest). Please note; In case the bike needs to be shipped to another destination, please ask whether I can offer you such a deal as well before placing a bid. Furthermore, when you want to receive some better photo's of the bike/shipping, or want to recieve more information about this item, just let me know. When you think that you recognize this machine, I've sold an exact similar bike on eBay about six weeks ago and since then I've succeeded to persuade the collector where it came from to also sell me his remaining police R60/6 (which is this one) along with his very nice ex Amsterdam-police black 1973 R60/5." 1/1

< BACK TO CYLINDER HEADS Cylinder Heads (1969 and earlier) Current Inventory : Out of Stock Additional pairs of reconditioned heads will be listed when available. Email if you are intersted in a specific year/model pair of reconditioned heads HOW TO BUY: Contact me via email . Email response turnaround time is generally within one day. PAYMENT: PayPal only. Other payment types for Stateside only buyers can be arranged if necessary. Buyers will be sent a payment request via PayPal. SHIPPING: TBD $1400USD plus shipping Features: BMW Twins 55-69 reconditioned cylinder heads, R50,R60,R50/2,R60/2,R50US,R60US. New Swiss IV valves New spring lower cups New spring upper caps New inner springs New outer springs New valve guides New valve guide clips New valve/locks/keepers New valve seats Fins in very good to excellent condition Exhaust threads are new Combustion chambers in very good to excellent condition Gasket surfaces in very good to excellent condition Spark plug factory thread inserts (1/2" reach) in very good to excellent condition Carb M8 studs (NOS CAD plated) in excellent condition VC M8 studs (New SS) in excellent condition Ultrasonic cleaner processed Machining done on a Rottler S&G machine SOLD! 1/1

BMW R80G/S & R80ST < BACK TO PARTS Sidestands In Stock HOW TO BUY: Contact me via email . Email response turnaround time is generally within one day. Verify what modifications, if any, are on your machine and your location for shipment. The sidestands are designed to fit stock machines and some with modifications. PAYMENT: PayPal only. Other payment types for Stateside only buyers can be arranged if necessary. Buyers will be sent a payment request via PayPal. SHIPPING: Domestic ( LOWER 48 States): $20USD for FedEx Ground International: USPS Priorty Mail is used. Only the actual USPS shipping cost is charged. Costs for shipping range from $40USD to $70USD. Please contact me if you have a way to ship a sidestand package from the States to an International destination for less than what USPS charges. NOTE: Drawings are not sent out for the DIY'ers. These stands are a robust alternative to the factory BMW sidestand. Features: All steel construction Simple two-point fastener mounting design Ideal to use for both short and long inseam riders Robust mounting attachment plates No required modifications to the bike for the installation Note: It is recommended to always use the bike's centerstand for long term parking. The regular cost is $300 USD each, plus shipping. They are currently on sale for $200 each, plus shipping. Note: The sale price is valid until the current inventory is gone. For additional details contact flyingtpot@satx.rr.com. The photos below were taken on a journey documented in the motorcycle adventure book: TWO WHEELS SOUTH The BMW R80G/S used a FTP sidestand for the trip.Additional information on their 20K mile adventure can be found here .

1955-69 BMW Twins < BACK TO PARTS Sidestands Out of stock. Expected date for new stock is the end of December 2025 HOW TO BUY: Contact me via email . Email response turnaround time is generally within one day. Verify what modifications, if any, are on your machine and your location for shipment. The sidestands are designed to fit stock machines and some with modifications. PAYMENT: PayPal only. Other payment types for Stateside only buyers can be arranged if necessary. Buyers will be sent a payment request via PayPal. SHIPPING: Domestic ( LOWER 48 States): $20USD for FedEx Ground International: USPS Priorty Mail is used. Only the actual USPS shipping cost is charged. Costs for shipping range from $40USD to $70USD. Please contact me if you have a way to ship a sidestand package from the States to an International destination for less than what USPS charges. NOTE: Drawings are not sent out for the DIY'ers. These stands are a robust alternative to the factory BMW sidestand. Features: All steel construction Simple two-point fastener mounting design Ideal to use for both short and long inseam riders Robust mounting attachment plates No required modifications to the bike for the installation Note: It is recommended to always use the bike's centerstand for long term parking. The cost is $199 USD each, plus shipping. For additional details contact flyingtpot@satx.rr.com.

< BACK TO CYLINDER HEADS Cylinder Heads (1970 and later) Current Inventory : Email for inventory status. Additional pairs of reconditioned heads will be listed when available. Email if you are intersted in a specific year/model pair of reconditioned heads HOW TO BUY: Contact me via email . Email response turnaround time is generally within one day. PAYMENT: PayPal only, Zelle, money order, check. Other payment types for Stateside only buyers can be arranged if necessary. For PayPal, buyers will be sent a PayPal payment request. SHIPPING: TBD

< BACK TO MISCELLANEOUS BMW Technical Drawings And Unique Pics Note: Any and all credit goes to the creators of these files. They are not property of FTP.

< BACK TO RESTORATION Pre-70 BMW VTO Kits and Modifications Contact me for cost and additional details

< BACK TO MISCELLANEOUS Travel Pics India 1/1 Thailand 1/1

< BACK TO MISCELLANEOUS Tefco Brochure 1/1

< BACK TO MISCELLANEOUS Cleveland Twist Drill 1/2

< BACK TO PARTS 1968/69 BMW Twins US Fork Damper Plate In stock These are new high quality reproduction damper plates. The crossbar is welded to the main plate. The damper friction material is bonded on both sides of the main plate. The damper plates are often damaged from age and abuse. The cost is $99 USD each, plus shipping. For additional details contact flyingtpot@satx.rr.com

< BACK TO RESTORATION BMW Plunger Half-Hub Repair Contact me for cost and additional details