1955-69 Twins Pannier Adapter-Mounts

bulletAll steel tubing design.
bulletCNC formed tubing.
bulletAll TIG welded construction.
bulletAll stainless steel main attachment hardware.
bulletBlack powder coat finish.
bulletThe system still retains a full view of the R69S emblem, where applicable.
bulletIn most installations, the rear shock adjuster levers remain functional.
bulletGerman manufactured Givi mounting hardware.
bulletDesigned to accommodate the Givi E21 Cruiser Monokey hardcases.

pannier I.JPG (480864 bytes) pannier II.JPG (463741 bytes) pannier III.JPG (518077 bytes)

pannier IV.JPG (321047 bytes) pannier VI.JPG (403125 bytes) pannier V.JPG (336022 bytes)

pannier VII.JPG (273788 bytes)

red sled packed.JPG (161617 bytes) red sled w_ new givis.JPG (145923 bytes)

 Darr 1.JPG (110305 bytes) Darr 2.JPG (83054 bytes)

givi blk 1.JPG (336220 bytes) givi blk 2.JPG (326472 bytes) givi blk 3.JPG (414464 bytes) 

givi blk 4.JPG (396135 bytes) blk givi 6.JPG (271653 bytes) givi blk 5.JPG (401571 bytes)

phoenix 04.23.11.jpg (89560 bytes)

 

The kit includes: 

bullet

One left pannier mount

bullet

One right pannier mount

bullet

One crossover brace

bullet

One pair of support struts

bullet

One set of mounting hardware

bullet

Installation instructions

mount set I.JPG (267055 bytes)

Also included are support struts. These are for the riders that want to use large panniers, such as the numerous aluminum boxes on the market. These struts are not required for the standard E21 hardcases. The struts mount from the top hoop to the shock mount rear most M6 fender through hole. 

support struts.jpg (50074 bytes)

 

Note: The bike and Givi hardcases are not included.

The cost is $250USD plus shipping

 

Adapter-Mounts Pic Gallery

1966 R69S

 

R60/2

 

R50

E-mail for additional information & International shipping costs

 

Index Page